Just Plastics UK - Installation Guide
Please follow carefully the manufacturers mounting instructions for a perfect result.
Just Plastics panels are universally applicable. It can be installed in every room of your home. But it is especially conceived for fitting into ‘wet’ environments (bathrooms, kitchens, ...)
Just Plastics panels are virtually maintenance free. They are easily cleaned with normal domestic cleansing products (do not use abrasive or solvent containing products)
Just Plastics also have a range of products for exterior application. Ask your distributor for details.
Fitting Instructions: Just Plastics panels are easily fixed to almost every surface. Depending on the type of wall or ceiling you can choose different types of fitting.
Nailing: apply nails evenly and level in the panel lip. Be careful not to hit the panel with the hammer. This method only applies when fixing the panelling to a wooden surface or battening.
Stapling: use stainless staples when fixing to plaster. This method is most recommended when fixing to wooden battening. Make sure the battening is flat and level, packing out where necessary on uneven walls so that when applied the panelling does not develop curvature following wall contours.
Gluing: only works when applied to an even, dry wall. The wall must be free of any greasy substances and dust. Only use specialist adhesive. Ask your distributor for advise.
In case of damp and uneven walls we recommend the use of treated timbers for battening. Ensure that you leave sufficient ventilation behind the panelling by providing air gap between the battening. Position battens with 40 to 60 centimetre intervals.
Use end profiles to finish off the panelling. (see drawings)
Using battens allows you to install cables for switches and plugs for power supply, phones,
Check the temperature around heat radiating objects. It must not exceed over 60 degrees centigrade.
Just Plastics panels are UV resistant.
Material: polyvinyl chloride
Use: the panels are to be used as decorative wall and ceiling panelling
Maintenance: we recommend the regular use of non-abrasive domestic cleansing products. Do not use solvents or solvent containing products
Recycling: this product is entirely recyclable
Environment: install the panels only in well-ventilated areas. Our products do not fear water or moisture.
Non-observance of one or more of the above recommendations releases the manufacturer of all responsibility.
All data is provided in good faith. Minor shape or colour alterations may occur due to manufacture. Check all panels in day-light prior to use. Any complaints filed after installing the panels, will be rejected.
